CALL US

Tel: +6016-7586707 or +65-96171388

EMAIL US
ALMOST 30 YEARS
EXPERIENCE

We supply chemicals that lay a strong foundation and help mold the future.

OUR SERVICES

- Soil Stabilization Chemicals

- Mold Maintenance Chemicals

VISIT US

54, Jalan Permas 9/12,

Bandar Baru Permas Jaya,

81750 Johor Bahru, Johor,

West Malaysia

© 2020 by Hoshama Technology.

SEMICONDUCTOR AND OPTOELECTRONICS

Premium Pure Carnauba Wax Mold Release

Its active ingredient is derived and refined from the highest grade of pure carnauba wax. Its residues have anti-rust properties. It can rustproof mold, break-in new mold and prolong mold life. It has a specially designed dip tube and nozzle system in order to prevent clogging problems.

It is environmentally friendly as it does not contain any banned substances and it meets EPA, RoHS and REACH standards.

It is compatible with normal or conventional epoxy mold compounds (EMCs), green epoxy mold compounds (G-EMCs), white epoxy mold compounds (W-EMCs) and optically clear mold compounds (C-EMCs).

Premium Par-Film Mold Release

It is a highly effective micro-thin, film-forming and clear liquid type of mold release. It requires only a thin coating which allows greater savings per spray. It has excellent release ability and durability. A longer molding cycle means greater productivity. It does not contain contaminants so there is no build-up of oil or wax residues, resulting in a cleaner mold, fewer rejects, and lesser cleaning costs.

It is environmentally friendly as it does not contain any banned substances and meets EPA, RoHS and REACH standards.

 

It is only compatible with normal or conventional epoxy mold compounds (EMCs) and green epoxy mold compounds (G-EMCs).

RUBBER AND PLASTICS

Clean-It #11 Super Citri-Scent Mold Cleaner

Super Citri-Scent is a broad range, biodegradable, citrus derived cleaner effective on most residues and stains. #11 works well on warm dirty molds, tooling and machines to remove excess release agent, grease, oil and fingerprints.

Available in aerosol cans only.

Clean-It #14 Non-Flammable
Cleaner for Hot Molds

Non-Flammable #14 is a penetrating cleaner for safe “on-line” work on hot molds. #14 is a strong blend of solvents designed to remove excess release agent, grime and contaminants that affect molded part surface finish and appearance.

 

Available in aerosol.

Clean-It #16 Mold Brite
High Purity Mold Cleaner

Super Citri-Scent is a broad range, biodegradable, citrus derived cleaner effective on most residues and stains. #11 works well on warm dirty molds, tooling and machines to remove excess release agent, grease, oil and fingerprints.

 

Available in aerosol cans only.

Eject-It #20-6 Heavy Duty Silicone 6% Active

A universal, silicone type non-paintable mold release agent for injection, RIM, compression, extrusion, casting, lay-up and forming. Works well for ABS resins, acetals, melamines, methacrylates, nylons, PE, polycarbonates, polystyrenes, PP, polyurethanes as well as natural and synthetic rubbers. Available in standard 3% silicone and Heavy-Duty 6% silicone formula.

 

Available in aerosol cans only.

Eject-It #22 All Purpose
Thermoset Mold Release

Precision blended silicone mold release and lubricants to mold thermoset materials by injection, RIM, casting, compression and other forming operations. Applications include: epoxies, polyurethanes and polyesters.

 

Available in aerosol cans only.

Eject-It #25 Paintable
Food Grade Mold Release

A natural LECITHIN formula mold release for molding thermoplastics and some thermosets. Broad-spectrum uses include: ABS, acetals, epoxies, melamines, phenolics, polyesters, polyethylenes, polycarbonates, nylons, polyvinyls, polystyrenes, polypropylenes, polyurethanes and rubbers.

 

Available in aerosol cans only.

Eject-It #28 Fluorofilm
“Dry Coat” Mold Release

A high performance mold release compatible with thermoplastic and thermoset resins as well as silicone rubbers. Allows post- molding operations straight from the mold. The finely tuned propellant and atomization system produces a uniform micro-platelet film on the mold.

 

Available in aerosol cans only.

Investment Casting Citrus Cleaner

ICR Citrus Cleaner is an easy to use, citrus derived cleaner that is biodegradable and environmentally friendly. It is powerful enough to clean wax from ceramic-injection tooling and can be used on tooling for wax dies. It works well on warm, dirty molds, tooling and machines. It is an effective, citrus scented cleaner.

 

Available in aerosol.

Ultra 3 Blue Label Paintable Mold Release

Blue Label mold release is a blend of modified siloxanes formulated for a wide variety of plastics. It is an ambivalent mold release in that it affords excellent release characteristics while allowing the adhesion of post molding decoration. Use Blue Label instead of Yellow Label when post molding decorating or other secondary operations are anticipated. Blue Label is also EPA compliant and worker safe.

 

Available in aerosol. Bulk aerosol cylinders are made-to-order, not in-stock items.

Ultra 3 Polyester Parfilm Mold Release

Polyester Parfilm is a micro-thin, film-forming release agent formulated expressly for polyester resin systems, filled polyester resins and fiberglass reinforced polyester. Its film-forming ability inhibits the migration of the monomer catalyst, impedes the degradation of the mold and yields longer mold life. Heat stable to 600°F.

 

Available in aerosol. Bulk aerosol cylinders are made-to-order, not in-stock items.

Ultra 3 Spinnerette Spray for Polyester

The synergistic blend of release agents incorporated in our Spinnerette Sprays is fine tuned to prevent build-up at extrusion orifices and allow less cleaning of the Spinnerette head. Spin Spray for polyester is specifically formulated for use in extruding polyester fibers with heat stability to 575°F. Comes with vertical spray actuator (horizontal spray available upon request).

 

Available in aerosol cans only.

Ultra 3 Yellow Label Spinnerette Spray

The synergistic blend of release agents incorporated in our Spinnerette Sprays is fine tuned to prevent build-up at extrusion orifices and allow less cleaning of the Spinnerette head. Yellow Label Spin Spray is an all-purpose, unique multi-viscosity silicone that is stable to 900°F. Comes with standard horizontal spray actuator (vertical spray actuators available upon request).

 

Available in aerosol cans only.

Ultra 4 Anti-Stick Food Grade Mold Release

Anti-Stick for food processing is the best mold release to use when molding or fabricating materials that come into secondary contact with edibles. The active release agents in Anti-Stick comply with FDA Regulations (FDA approved pursuant to 21 CFR 175.300, Subchapter B, Section 3, Part XXV: Release agents as the basic polymer, and 21 CFR 181, Subchapter B, Section 181.28: Release agents) and the propellants and solvents are not considered food additives as they evaporate almost immediately.

 

Available in both Ultra 3 and Ultra 4 formulations.

Ultra 4 Epoxy Parfilm Mold Release

Epoxy Parfilm is recommended for epoxy resins. Its highly effective, micro-thin, film-forming application offers a better release than polyvinyl alcohol or wax. Its micro-thin film maintains the fidelity of the cast piece and affords better surface reproduction and finish. Heat stable to 635°F.

 

Available in aerosol, non-pressurized liquid, and undiluted bulk concentrate.

 

Available in aerosol bulk cylinders (made to order only, Net 37 pounds) Bulk aerosol cylinders are made-to-order, not in-stock items.

Ultra 4 Investment Casting Release

Investment Casting Release is formulated expressly for investment and lost-wax casting. Its non-silicone, heavy- duty formula is non-melting and will not carbonize.

 

Available in 12 ounces cans and 37 pound pressurized cylinders. Cylinders are made-to-order, not in-stock items.

Ultra 4 Polyester Parfilm Mold Release

Polyester Parfilm is a micro-thin, film-forming release agent formulated expressly for polyester resin systems, filled polyester resins and fiberglass reinforced polyester. Its film-forming ability inhibits the migration of the monomer catalyst, impedes the degradation of the mold and yields longer mold life. Heat stable to 600°F.

 

Available in aerosol.

Ultra 4 Silicone Investment Casting Release

Silicone Investment Casting Release combines all of the properties of the standard Investment Casting Release with the enhanced benefits of silicone. It’s ideal for use with complicated molds, thin-walled areas or small, intricate pieces where extra release is required.

 

Available in 12-oz. cans and 37-lb pressurized cylinders. Cylinders are made-to-order, not in-stock items.

Ultra 4 Water Soluble
Investment Casting Release

Water Soluble Investment Casting Release combines all of the properties of the standard Investment Casting Release in a water soluble formula that eliminates build-up on molds. It’s ideal for use on large parts or when citric acid bath leaching is required.

 

Available in 12-oz. cans and 37-lb pressurized cylinders. Cylinders are made-to-order, not in-stock items.

Clean-It #13 Resin Invader

Resin Invader is an aggressive penetrating formula for removing thermoset resins, residues, char, greases and other tough materials. #13 can be used on warm to hot molds and tooling. Resin Invader is the ideal choice for tough jobs.

 

Available in aerosol.

Clean-It #15 Economical Mold Cleaner

Clean-It #15 is an economical and powerful cleaner for numerous shop jobs such as molds, tooling and machines. Use #15 for “pre-run” mold touch up and “post-run” mold cleaning.

 

Available in aerosol.

Eject-It #20-3 Standard Silicone 3% Active

A universal, silicone type non-paintable mold release agent for injection, RIM, compression, extrusion, casting, lay-up and forming. Works well for ABS resins, acetals, melamines, methacrylates, nylons, PE, polycarbonates, polystyrenes, PP, polyurethanes as well as natural and synthetic rubbers. Available in standard 3% silicone and Heavy-Duty 6% silicone formula.

 

Available in aerosol cans only.

Eject-It #21 All-Purpose
Paintable Silicone Mold Release

Organo-modified silicone mold release agent that allows post molding decoration on thermoformed or cast plastics, rubbers and reinforced engineering resins. Applications include: ABS resins, acrylics, melamine’s, methacrylates, nylons, PE, phenolics, polycarbonates, PP and PS.

 

Available in aerosol cans only.

Eject-It #23 Paintable Thermoset Mold Release

A copolymer blend of paintable silicones good for release on plastics, rubber and reinforced composites. Applications include epoxies, polyurethanes and polyesters.

 

Available in aerosol cans only.

Eject-It #26 Extra Clean & Pure
Non-Silicone Paintable Mold Release

A highly refined, paintable and silicone-free mold release formula of crystal clear, white oil compatible for molding medical or food contact materials. #26 works well with many thermoplastics, most thermosets, rubbers and patterns for RTV silicone rubber molds.

 

Available in aerosol cans only.

Eject-It #33 Petrolease

Non-Silicone #33 works for rubber molds, molded rubber and releases almost everything from anything. It also contains an FDA regulated active, for use with food and medical applications. PETROLEASE has extensive applications for prototyping and pattern work. #33 also works well for RTV and tin or platinum curing elastomers.

 

Available in aerosol cans only.

Ultra 3 Anti-Stick Food Grade Mold Release

Anti-Stick for food processing is the best mold release to use when molding or fabricating materials that come into secondary contact with edibles. The active release agents in Anti-Stick comply with FDA Regulations (FDA approved pursuant to 21 CFR 175.300, Subchapter B, Section 3, Part XXV: Release agents as the basic polymer, and 21 CFR 181, Subchapter B, Section 181.28: Release agents) and the propellants and solvents are not considered food additives as they evaporate almost immediately.

 

Available in both Ultra 3 and Ultra 4 formulations.

Ultra 3 Epoxy Parfilm Mold Release

Epoxy Parfilm is recommended for epoxy resins. Its highly effective, micro-thin, film-forming application offers a better release than polyvinyl alcohol or wax. Its micro-thin film maintains the fidelity of the cast piece and affords better surface reproduction and finish. Heat stable to 635°F. Available in both Ultra 3 and Ultra 4 formulations.

 

Available in aerosol. Bulk aerosol cylinders are made-to-order, not in-stock items.

Ultra 3 Spinnerette Spray for Nylon

The synergistic blend of release agents incorporated in our Spinnerette Sprays is fine tuned to prevent build-up at extrusion orifices and allow less cleaning of the Spinnerette head. Spin Spray for Nylon is specifically formulated for use in extruding nylon fibers with heat stability to 600°F. Comes with vertical spray actuator (horizontal spray available upon request).

 

Available in aerosol cans only.

Ultra 3 Urethane Parfilm Mold Release

Urethane Parfilm forms an ultra-thin coating that allows excellent reproduction of your urethane castings. This chemically inert release agent is formulated specifically for urethanes, is paintable and is heat stable to 575°F.

 

Available in aerosol. Bulk aerosol cylinders are made-to-order, not in-stock items.

Ultra 3 Yellow Label Universal Mold Release

Ultra Yellow Label mold release is a synergistic blend of highly efficient release agents. It can be used where a specific formulation is not needed or desired. Yellow Label is widely accepted in the jewelry and lapidary trades. It is also an excellent lubricant for all metal to elastomeric surfaces.

 

Available in aerosol.

Ultra 4 Blue Label Paintable Mold Release

Blue Label mold release is a blend of modified siloxanes formulated for a wide variety of plastics. It is an ambivalent mold release in that it affords excellent release characteristics while allowing the adhesion of post molding decoration. Use Blue Label instead of Yellow Label when post molding decorating or other secondary operations are anticipated.

 

Available in aerosol.

Ultra 4 Fast 2 Shell
Investment Casting Release

Fast 2 Shell is the newest addition in our Investment Casting Release product line. Its unique non-silicone, water-soluble formula allows you to go straight to the shelling process with no washing required!

Ultra 4 Nylon Mold Release

Formulated specifically for nylon resins and nylon materials for parts released more efficiently than a universal release. Nylon Ultra 4 is a paintable release which allows post operations of parts.

 

Available in aerosol.

Ultra 4 Polypropylene Mold Release

Formulated specifically for all grades of polypropylene, it will not cause stress cracking associated with silicone type releases.

 

Available in aerosol.

Ultra 4 Urethane Parfilm Mold Release

Urethane Parfilm forms an ultra-thin coating that allows excellent reproduction of your urethane castings. This chemically inert release agent is formulated specifically for urethanes, is paintable and is heat stable to 575°F.

 

Available in aerosol.

Ultra 4 Polypropylene Mold Release

Ultra Yellow Label mold release is a synergistic blend of highly efficient release agents. It can be used where a specific formulation is not needed or desired. Yellow Label is widely accepted in the jewelry and lapidary trades. It is also an excellent lubricant for all metal to elastomeric surfaces.

 

Available in aerosol.